This Woburn Wood burning stove is the perfect accompaniment to any shelter, providing comfortable heat and fighting off the harshness of our winters. The Chester wood burning stove is suitable for multifuel use and is delivered with-in 7-10 days on a purpose made crate, pre-assembled apart from the legs and flue connector. Flue pipes are not supplied as the lengths required vary for each permanent installation.
Wood Burning Stove Woburn Multifuel Details:
- Width: 71cm
- Depth: 45cm
- Height: 71cm
- Weight: 175kg
- Output: 9.5kw
- Suitable for Multifuel Use
- Built-in Ash Pan - easy to clean
- Heat resistant glove and handle
- 6 inch top or rear flue connection (pipe not supplied)
- Blanking plate for flue supplied
- Solid Cast Iron Construction & High Temperature Glass
- ΠUK Approved
Important Things to Check:
Has my chimney been swept?
- Your chimney should be swept prior to fitting as when a stove is fitted into a fireplace, the throat of the fireplace has to be sealed off using a register plate.
Is my chimney suitable?
- The chimney must be of the proper size (minimum 8inch diameter) and height - preferably over 4.8m.
Will i need a chimney liner?
- If you have a very large chimney a liner will improve the performance of your stove.
Will I need extra ventilation?
- Stoves above 5kW output require additional permanent ventilation as per Building Regulations.
Will my Wood Burning Stove Heat my Room :
To estimate the correct size of stove required, please use the supplied chart.
For example; Take your rooms width in metres then cross-reference your rooms length in metres, which will give you a rough guide to the kW in heat required to heat your room. (please note the chart is based on the heating of a typical and average insulated room, and many factors such as the number of doors and windows and whether they are double glazed will have to be taken in to account) - Less or poor insulation will require more kW of heat.
Flue pipes can be fitted by any DIY enthusiast, however the fitting must comply with Building regulations J1/2/3 Heat producing appliances which states: Any boilers and/or fires burning oil, solid fuel or gas including incinerators, must be ventilated sufficiently to allow full combustion and exhaust. Chimneys and flues must meet safety regulations and fireplaces must resist the heat produced to keep the building safe.
Product Code: LH-LH043